Re: Free Windows SDK + Galileo from Microsoft
Hi Yuri, If you don't have your SD card inserted, you won't be running the Windows for Devices OS, but Linux from the onboard flash. It's possible that you can telnet to that, but it won't work with...
View ArticleRe: Intel SSD Toolbox has stopped working V3.2.1 and V3.2.3
I recently swapped out Dells old Samsung SSD for a new INtel 530. The migration went fine. But the toolbox fails to load although the installer appears to finish. It gets to the "run now" question. I...
View ArticleRe: DN2820FYHK
No using it on a HDTV and I have tried 2 HDMI cables.There is no power light blinking and I have tried a different ram card that works in my i3 nuc.
View ArticleRe: Free Windows SDK + Galileo from Microsoft
Hi Thomas,thanks for replying.I did upgrade the firmware and prepared Windows image on uSD (tried both images for Gen 1 Galileo). Didn't try to telnet to native Linux - will try on Monday.Must the...
View ArticleRe: How best proceed with overheating i7-4790K?
I hope Intel will come with some sort of statement soon. I am on the verge of buying the 4790K, but if there is a bad batch, or there is a design flaw I will not get it. But I first need that...
View ArticleRe: Free Windows SDK + Galileo from Microsoft
Hi Yuri,Must the Ethernet cable be crossover or not? Or it doesn't matter (some devices understand what kind of cable it is)?If your computer has Gbit ethernet, it doesn't matter, those are required to...
View ArticleRe: How do you disable the default Edison server?
configure_edison is a python script. You can see the path to the script using comment "which configure_edison". I took a quick look and it is not obvious how this is actually telling the server to run....
View ArticleClik here to view.
Re: Debian on Edison
Hi! I created a script to install a Debian chroot directly on the Edison without the need to prepare anything on a PC. The /home partition is usually mounted with nodev and cdebootstrap does not like...
View ArticleRe: HC-SR04 Sketch
You should do one at a time. In your code, you tried to trigger both left and right, and then read left twise.Also from what I remember there are just two fast pins on galileo so make sure to connect...
View ArticleRe: Intel AC7260 limited access after sleep
This executable file is a drivers package in fact. Installation is uncompression proces. I 'installed' it on drive D but you can install it oo pendrive as well. After driver update what i mentioned in...
View ArticleRe: Whats all that yummy stuff on the PCI bus?
I was looking at this myself last night If you try lspci -v you get a bit more info. The signal processor is using the 'pciPTI' kernel driver and when I googled it I found this:...
View ArticleRe: Debian on Edison
My good man, you've done it! Just a simple movement of " www-data ALL=(ALL:ALL) NOPASSWD:ALL" to the end of the file in /etc/sudoers was indeed the solution. Salutations!Jim
View ArticleSYSTEM_SERVICE_EXCEPTION on boot with second displayport monitor
Hello I am using a Dell E7440 with a PR02X port replicator and two Dell P2214H monitors connected through displayport. The laptop has an Intel Core i7-4600u processor with embedded 4400 graphics....
View ArticleRe: How best proceed with overheating i7-4790K?
I tried your suggestions. Thanks. On my machine the CPU frequency was fixed at 4.00GHz and it wasn't obvious that it could be changed anyway. Similarly the power limit was already set for 88w, but I...
View ArticleRe: How to start DN2820FYKH without display?
I have now tested my NUC again a couple of times. If I try to boot it without a display attached, nothing at all gets written in the logs. The booting should be done by elilo, and the linux kernel is...
View ArticleRe: How best proceed with overheating i7-4790K?
I'm sorry to hear that you are still having problems, I think you have it even worse then me. My CPU started overheating when I was around 70-100% CPU-usage, looks like it's already happening for you...
View ArticleClik here to view.
Edison opkg package repo created
Hello everyone, As much as I like the idea of enabling Debian on Edison - and that's something I'm going to participate in to make it even easier to use in addition to all that great work done in the...
View ArticleRe: Question regarding linux and galileo
Obviously one can never support everything out of the box. However, in this case you are lucky: Opencv libs are contained indevkit-x86\sysroots\i586-poky-linux\usr\lib and include files...
View ArticleRe: No Display with NUC 2820 and Onkyo AV at 50Hz
Does the issue occur when accessing the BIOS or only when the operating system starts booting?In other words, can you see the “Intel® NUC” screen?
View Article