Re: I2C with intel Galileo Gen1
Hi ArunMKumar. The OneWire.h library it's supported since a while ago (verify that you are using the IDE v1.0.4 and you are using the latest formware in your board). Go to File>Examples>OneWire...
View ArticleD34010WYB does not continue POST without USB keyboard attached
Maybe I'm overlooking something obvious (or less obvious than I hoped it would be), but my D34010WYB stays put on the "Intel NUC" POST splash until I connect a USB keyboard. If the keyboard is present,...
View ArticleArduino sketch won't upload. How to fix?
I'm using the edison on an Arduino breakout board with both micro USBs connected to a Mac running OS X 10.10 and Arduino 1.5.3-Intel.1.0.4. It's a brand new board and I'm just trying to upload the...
View ArticleRe: Audio/Graphics driver problem on D54250WYKH
Hi Silvia, Sorry for my late reply and thank you for your response. It seems to be working for me. I can now play DTS HD Master Movies from XBMC and my receiver reports Multichannel PCM as I understand...
View ArticleRe: Intel Edison GPIO Pin Multiplexing Guide
Hello, I'm trying to configure UART1, with :Intel Edison Breakout board12 V on J21Connect to the board via Wifi / IP.I re-flashed with the latest kernel (edison-image-rel1-maint-rel1-ww42-14.zip)Linux...
View ArticleRe: Intel RST (Windows application) not offering to preserve data when...
The compatibility is listed in the ReadMe file provided for each version of Intel® Rapid Storage Technology.It is the first time I see this behavior. Did you remove the version 13.2.4.1000 before...
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
Hi Swigert, This information only tells me which image you tried to flash. I need to know which version you actually have. Please run the command cat /etc/version and let us know the output. RegardsSergio
View ArticleClik here to view.
Re: bricked Galileo gen2 after a wrong connection
Hi, *Personal Information has been removed.
View ArticleRe: Trying to get started with the mini breakout board
I don't see any .js files in that repo...? Only .ino and .cpp.
View ArticleRe: BSOD on resuming from hibernate
I see the reference to the file netwbw02.sys but the other dump file shows WppRecorder.sys.After searching about this last file I found out that data compression is a possible cause of the issue. See...
View ArticleRe: CDC serial and RNDIS drivers not installing
Did you successfully complete the flashing process of your Edison? Also verify that the switch between the microUSB port and the USB port is closer to the microUSB one. And please add a screenshot of...
View ArticleRe: pca953x 1-0020: failed reading register
FWIW, I get (a variant of) these messages even when my Edison IS plugged into the Arduino breakout: Starting kernel ...[ 0.758919] pca953x 1-0020: failed reading register[ 1.636840] pmic_ccsm...
View ArticleRe: D54250WYKH - Bluetooth connection problem with the Wireless-AC 7260
I suggest you opening a ticket with the wireless support team by using any of the options below. USPhone: 1-916-377-7000, Monday – Friday, 07:00 to 17:00 (US Pacific Time)Live ChatE-mail Form...
View ArticleRe: storage capacity is only 600 MB ?
Hi Tim_LHUILLIER, Yes, it is possible to modify the size of the partitions on Edison. Please check this guide on how to do it http://alextgalileo.altervista.org/blog/changing-partition-setup-edison/....
View ArticleRe: INTEL CONSTANT WIFI DISCONNECTS *WE SHOULD SUE*
If you have tried all other recommendations given before, I suggest you creating a ticket by contacting the support staff as indicated in the first page, post 10.
View ArticleClik here to view.
Re: storage capacity is only 600 MB ?
Thanks for help. I try to flash Ublinux but i'm problem : https://communities.intel.com/message/262497?tstart=0#262497
View ArticleRe: storage capacity is only 600 MB ?
I read the article. I have one question, Where is "edison-src/device-software/meta-edison-distro/recipes-bsp/u-boot/files/edison.env" and...
View ArticleRe: GetCurDateTime function - how is this?
Terrence_ and UST_, not knowing Arduino, I was looking on the Arduino page Arduino Playground - Time and from what I am seeing your code is close.It looks like in Arduino after time_t t = now(); your...
View Article