Re: write error: No space left on device
so the patch will be "Storage=volatile" or seting up maximum log size ?
View ArticleRe: Using Serialx on Edison
I am using Eclipse over WiFi. Had to discover a couple of tricks to get it working. The WiFi connection is nice as it frees up the UBS ports for the hardware I want to attach.
View ArticleRe: Edison/Arduino Breakout Board SPI
That didn't work (left it deleted anyway), but banging around, I copied the SPI library from arduino-windows-1.0.4\arduino-1.5.3-Intel.1.0.4\hardware\arduino\edison\libraries and used it to replace the...
View ArticleRe: can't build edison image
This is definitely looking like a dead end. I found a FreeBSD port of chrpath, but that can't find its own dependencies. I'm going to load up Ubuntu on Parallels and call it a day.
View ArticleRe: Edison/Arduino Breakout Board SPI
Update. What you suggested did work, without any other action. Simply delete the Robot_Control library, which also contains SPI library files. Thanks again.
View ArticleRe: 3D Game killing BUG? Intel HD graphics card has ZERO "reported dedicated...
OK, here is DXDIAG. I was mistaken, I thought the Dell driver had the same version number as the generic driver, but it is different. There is no setting in the BIO to even display the video ram. It...
View ArticleRe: Using Serialx on Edison
I have just been alerted that ttyUSB0 works "without a hitch". We now have GPS data dumped to the console. A good start. Next, bluetooth.
View ArticleClik here to view.
Re: Error during Kernel Compilation: make: *** No rule to make target...
The log is in my workshop which I don't have access to right now. I'm running Ubuntu 14.04 Trusty x86_64.
View ArticleTransfer Incomplete 2
Ok I am back to getting the transfer incomplete error. I must be doing something different, but I have no idea what.Edison on Arduino boardPowered and plugged into usb, com port 8. Thank you for your...
View ArticleRe: gpio-leds registration/devicetree
forced it to remux on boot in platform_hsu.c just look at the line with 128 in it. staticvoid hsu_port_enable(int port){ struct hsu_port_pin_cfg *info = hsu_port_gpio_mux + port; if...
View ArticleRe: NUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello lhill Are you guys still looking for more units to swap? Mine unit is saying that on random. If this is specific to this unit can it be upgraded to another type of nuc? My retailer wont replace...
View ArticleRe: Transfer Incomplete arduino+edison
Alpha I would love to hear what you find out. I am trying to eliminate Time.h from my project because It keeps causing so many bizarre problems. All I need to do is the following, Anyone know of a way...
View ArticleRe: Intel HD-series Contrast Problem... blooming / overly bright areas - How...
Where do I find the DX Diag reports? These are all laptops so there is an LCD screen on them... but I don't use them. I only connect to a Benq W1070 DLP projector. The AMD based lappy (3 years old)...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
Just to update: I received my RMA chip and ran Prime95 and OCCT and average temperatures running stock (4.0/4.4GHz) was in the mid 50C's with a maximum of 62C. This is down from 90C-100C on my previous...
View ArticleRe: OneWire/DS18B20 Sensors on Node.js/mraa for the Edison.
The current kernel misses the one wire modules (w1-gpio, w1-therm, wire). It should not be a big problem to patch these but somebody must do it. In latest kernel versions (not 3.10) i saw them...
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
I have the same issue I think. I was using a 12VDC 800ma power supply connected to J1 to power the arduino board. After flashing I then disconnecting it for the first time. When I reconected the power...
View ArticleRobopeak and Windows image
Anyone able to install the LIBUSB drivers into the Windows image for the Intel Galileo in order to use the Robopeak USB display? I'm not able to install the drivers into the image before booting it up...
View ArticleClik here to view.
Re: Intel® Wireless-N 7260 - slows
dual band N7260 in my HP is working well with 17.13.0.9 drivers dated 09/29/2014 so far. no issues. i didn't change any options; U-APSD support etc. I have only connected to 2 different routers, both...
View ArticleRe: Graphics problem.
Many thanks for this information, its as I thought, I have been sold a HD3000, advertised as a HD4000. The 4000 supports Directx11, higher than the other.
View ArticleIntel DZ68BC error code 00
DZ68BC bios ver 0039 not VGA (beep error vga on). Recovery bios corrupPower on 2digi led only 00... not test 13, 20, 51, E4, E6... How to fix?File *.BIO not flash. Need *.BIN or *.ROM to reflash it....
View Article