Edison AnalogInOutSerial Arduino example not working
I am trying to run the AnalogInOutSerial example from the Arduino IDE on the Edison Arduino Expansion board but all the time I get an ADC reading of 130 even when connecting the ADC0 input to ground or...
View ArticleRe: How best proceed with overheating i7-4790K?
I've read about this overheating issue for the past few days, including this entire thread. We've all read reviews comparing the 4790k to the 4770k (and others) relative to heat, with promises that the...
View ArticleRe: IO Reference Address Register
Hello Sylvia, Thank you very much for the information. Regards.
View Articlegraphics accelerator
i have intel(r) 82945g chipset family,specifically intel core 2 duo... are there any methods to upgrade my media accelerator?
View Articlegraphics accelerator
i have intel(r) 82945g chipset family, core 2 duo specifically,any methods to upgrade my media accelerator without changing the chip?
View ArticleRe: Edison AnalogInOutSerial Arduino example not working
Yes, I've successfully run that example just now. 1023 when A0 connected to +5v and 0 when A0 connected to GND. Have you got a shield on the Arduino baseboard, or are you just connecting A0 to GND with...
View ArticleRe: Edison AnalogInOutSerial Arduino example not working
I just connected the A0 to ground with a wire, so I suspect that my Edison Arduino Extension board has a HW problem as it looks like a preproduction sample with some workarounds on the PCB. The same...
View ArticleClik here to view.
Understanding USB issues
I have D54250WYK I5I am aware after researching last night that many people have problems with the USB 3 ports but i cannot seem to find clarity on the issue. Is Intels response that this is hardware...
View ArticleRe: I2C + LCD LCM1602 Problems
those versions are dated.Could you pls do an update? you'd need to put a *.conf file in /etc/opkg folder, like:cat > /etc/opkg/mraa-upm.conf << EOFsrc mraa-upm...
View ArticleRe: wpa_supplicant.conf disappears when booting galileo
in general for any systemd service: systemctl disable <service name> What it does is just essentially removing the softlink in /etc/systemd/system and hence isn't found as a service to start any...
View ArticleWhich chipset to download for ga-z87x-ud3h motherboard?
Which chipset to download for ga-z87x-ud3h motherboard? thank you
View ArticleRe: IOT developer kit (beta) announced
have you checked the repos I referred to? You find various packages there.
View ArticleDC53427HYE Change Boot-Order
Hello, I do want to buy about 90 DC53427HYE's ( as they sadly are the only ones with the nice ManagementEngine ... ) and provision them with a Windows OS.For this I need to PXE-Boot them. But with the...
View ArticleRe: IOT developer kit (beta) announced
thanks for the feedback!we certainly try to add further devices. But at the end we encourage the community to contribute to UPM. Having an open source project for mraa / upm essentially everybody can...
View ArticleClik here to view.
S3200SH with 3TB drives
Hello,I have S3200SH board and want to create RAID5 array of four 3TB drives (I have also another RAID1 array, but that one works fine). I am using Intel Matrix Storage Manager as a raid controller. I...
View ArticleRe: Can anyboby tell me a detailed step by step guide to connect webcam to...
I did a quick online search - looks like the camera should work with uvc as well. I'd recommend to search online for something like "Linux VX-1000"
View ArticleDN2820FYKH won't respond to any IR input (Windows 8.1 64bit)
Hi guys, I'm slowly losing my mind with this infrared not working. I don't know what else to try. Previously I was running OpenELEC + PHT with the DN2820FYKH which was working perfectly with my Xbox...
View ArticleClik here to view.
Re: Widi & Windows 8.1 problems
Hi Joe, I know the problem is not my TV.As i said i have now Intel WiFi 7260 AC with a i5- 4760K processor with Intel HD 4600. My os is Windows 8.1.Intel site says that al this harware should work with...
View ArticleRe: IOT developer kit (beta) announced
Hi MHanhI checked out the application list after doing opkg update and looked at the git site. I am now going through the files on i2c LCD to see if I can get it to work with a generic LCD backpack.The...
View Article3 Pin ultrasonic sensor in galileo
Hi everyone At this moment i am trying to connect several ultrasonic sensor to my galileo. I know that pulseIn doesn't work in galileo. I make work a HC-SR04 sensor but what i need is detect distance a...
View Article