Re: DN2820FYKH blank screen while trying to enter BIOS
As I wrote in the beggining if I plug it directly to my TV there is no problem. I can enter the bios, and POST screen is in fulhd. But whe signal goes through my yamaha the post is in verry low...
View ArticleRe: D54250WYKH power button
I have run into the same problem after updating to the latest BIOS. I am no longer able to boot up the NUC. Power button stays green even after plugging and unplugging of external power. I plan to try...
View ArticleRe: Connecting to camera via USB using PTP & gPhoto2
Thank you Melvin.. but I am not fond of node.js yet and I cannot learn it now :/ . I used the SD image from Intel and tried to access it through SSH from my iphone and it worked. now I want to install...
View ArticleClik here to view.
Re: Intel DH61WW maximum total system memory
Hi John, First of all I apologize for replying on an old thread.Actually I am seeking help on the same topic, so did not want to start a new one.Please validate if my current BIOS version will be able...
View ArticleRe: Re: I Compiled the Poky Distribution. Now what?
I am talking about the arduino IDE. once my SD card is booted, the COM selection in the arduino IDE is not available. It is as if there is no board detected. So I couldnt upload any arduino sketches in...
View ArticleRe: Processors do not reach the maximum speed.
I read several topics on this subject, but could not ententer in a simple way ... I want the maximum performance of my processor does not care about power or anything ... What should I do to release...
View ArticleRe: Galileo not detected after booting from Yocto image
Thank you.. That seems like a reason. I am running 1.0.2 on my board. I tried downgrading my board to 1.0.0 but no luck. I couldn't downgrade further to 0.75. It says Firmware upgrade trigger failed....
View ArticleClik here to view.
Re: Garbage in screen after windows 7 login with HD 3000
Hello again! Thanks for your reply Robert! I really appreciate it. I tried with both drivers, generic and OEM specific for my model. I installed a fresh Windows 7 Ultimate with all security updates,...
View ArticleRe: Galileo not detected after booting from Yocto image
cool I will look into it. Thanks a lot
View ArticleRe: 请问DH61AGL的SATA电源输出口的供电能力是多少？
噢，这个很给力啊，像西数4T红盘（12v 0.45a 5v 0.5A），带个6，7块都够了，板上虽然只有4个口，但不还是有个pcie4x么，加个raid卡就有了，呵呵。双网口，还有amt，简单是nas的终极主板。 不过这板现在确实是难买啊，淘宝都没有，只有去日亚，美亚海淘了。 现在手头的dn2800mt性能偏弱，带硬盘数量也有限，但无风扇这点装个openwrt转职软路由比较不错。 总之十分感谢了。
View ArticleI need a driver for Intel Pentium p6100 2.00GHz
Hello first that nothing I am going to explain this in a detailed way in order that you could understand the problem.I need a driver for Intel Pentium p6100 2.00GHz. Intel HD Graphics.Of enough time I...
View ArticleRe: Intel AC7260 limited access after sleep
Same problem here - after each sleep I have to use "windows solve problems" to reset the adapterAC 7260 SONY VAIO SVZ1311 - upgraded to AC 7260Win 7 PROall Windows updatesINTEL PRO SET driver 17.0.3...
View Article7260 ac prowirelless reports radio off
I just upgraded the WiFi card in my Hp g72 to the 7260. The drivers installed fine and It's visoble in device manager with no errors. The radio switch is blue indicating its on, but it doesn't see...
View ArticleRe: WiFi not working in yocto image
No problem man. Try the arduino stuff and let me know.
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
I recently upgraded to Windows 8.1 from Windows 7.Have Asrock Z68 Pro 3 motherboard.Have 3x 1TB hard drives setup in RAID0, and have same issue as mentioned here with them.Also, have one 500GB drive,...
View ArticleRe: DQ77KB Can support four 3.5-inch hard disk
Hi there, it's an older topic, but for anyone who's interested I was crazy enough and tried it, even gone beyond the 4 HDD: I've, just like the starter of this thread, been interested in building a...
View ArticleRe: Intel Wireless AC 7260 Bluetooth stops working
Could you take a picture of the taped card?
View ArticleClik here to view.
Re: Intel Wireless-N 7260 fails to connect WLAN and Bluetooth with Windows 8.1
Hi,I had the same problems as everyone else....no or dropping wifi connection .After I gave my laptop a static ip...all problems solved. Maybe this helps some of you guys.
View ArticleRe: Getting "L" LED to blink via GPIO on Gen 2 board
I know the "L" LED is on pin 13, if that helps.
View ArticleRe: Intel Nuc D54250WYB won't startup
I'll try. Thanks for the tips. Will keep updated.
View Article