Hi,
a quick question. I am using a SD card image that I have built from the Galileo BSP I got from the Intel download centre.
It is based on meta-clanton-1.0.1, but I can't exactly remember which release it was (1.0.0 most likely, as I got it around
the end of July/beginning of August 2014). Does this have kernel support for the PCAL9535A GPIO expanders used in
GEN2?
The image is working perfectly on the GEN1 with the cypress expander, I can access the GPIO and analog ins
through the sysFS fine.
I have started using a GEN2 board, and booted from this image. My programs for other things work fine (with usb midi and audio), but I am not
sure whether the GPIO and analog pin functionality will work. Is there a way to tell, or does anyone know if it will
work? Do I need to build a new image from a different BSP, or apply any patches? I can't seem to find anything newer
than meta-clanton 1.0.1 though (it appears 1.0.2 to 1.0.4 releases use this with the usual openSSL etc patches).
Thanks a lot.