Hi Dazou84
Are you using the "Clone Displays" option so that both of your displays have the same content? If yes, what you are seeing is expected behavior. Clone display will use the same resolution for both display rather than the native or optimal resolution for each display. So unless both displays have the same native resolution one of the displays will be set to less than optimal and may not be visually satisfactory.
What you can do is change it to "Extended Desktop". Then you can use the optimal resolution for each display. You can then change the size for text, icons, etc are shown on each display using the Windows Display Personalization feature.
To Set to Extended Desktop:
1. Right click the Desktop, click "Adjust Resolution".
2. In the Multiple Displays dropdown, Select "Extend these displays". Be sure to select which one you want as a primary display and also drag the images of the displays in the configuration window to match the position you have them set up as.
3. Click "Apply", and click "Yes" to keep the settings.
4. If the resolution for each display did not automatically change to the optimal resolution for teach display, use the Resolution dropdown to select the maximum resolution for each display.
Once that is set the images on the WQHD display will probably be to small. To change the size of what is displayed, follow these steps:
1. Right click the Desktop, click "Personalization".
2. In the lower right corner click "Display"
3. Now click one of the size selections and click "Apply"
4. Reboot and see if that had the desired outcome. If not , try one of the other options.
Thanks
Robert